Transformation Protocol:
Use this procedure to transform ig® Thymidine-Auxotrophic EHA105Thy Agrobacterium ElectroCompetent Cells. Do not use these cells for chemically transformation.
1. Place sterile cuvettes and microcentrifuge tubes on ice.
2. Remove ig® Thymidine-Auxotrophic EHA105Thy Agrobacterium ElectroCompetent cells from the -80 °C freezer and thaw completely on wet ice (10-15 minutes).
3. Aliquot 1 µl (10pg -1 µg) of DNA to the chilled microcentrifuge tubes on ice.
4. When the cells are thawed, add 25 μl of cells to each DNA tube on ice and mix gently by tapping 4-5 times. For the pCAMBIA1391z control, add 1 µl of (500 pg/µl) DNA to the 25 µl of cells on ice. Mix well by tapping. Do not pipette up and down or vortex to mix, this can harm cells and decrease transformation efficiency.
5. Pipette 26 µl of the cell/DNA mixture into a chilled electroporation cuvette without introducing bubbles. Quickly flick the cuvette downward with your wrist to deposit the cells across the bottom of the well and then electroporate.
6. Immediately add 974 µl of Recovery Medium with 50 mg/L of thymidine or any other medium of choice to the cuvette, pipette up and down three times to re-suspend the cells. Transfer the cells and Recovery Medium to a 15ml of culture tube.
7. Incubate tubes at 30 °C for 3 hours at 200 RPM.
8. Spread 20-200 μl cells onto a pre-warmed selective plate. For the pCAMBIA1391z control, you may plate 100 μl of undiluted transformation mix onto a YT plate containing 50 μg/ml of thymidine, 15 μg/ml rifampicin and 50 μg/ml kanamycin. Use sterilized spreader or autoclaved ColiRoller™ plating beads to spread evenly.
9. Incubate the plates for 2 – 3 days at 30 °C.
Electroporation Settings:
Mode: Exponential protocol
Voltage (V): 1,800 V
Capacitance: 25 uFD
Resistance: 200 Ohms
Cuvette: 1 mm
If you cannot find the answer to your problem then please contact us or telephone +44 (0)1954 210 200